# Orange Pi Lite LIRC設定

**URL:** <https://forum.ficusonline.com/t/orange-pi-lite-lirc/104>\
**Category:** Orange Pi\
**Created:** [2017 年 5 月 26 日午前 7:36 UTC](https://forum.ficusonline.com/t/orange-pi-lite-lirc/104 "2017-05-26T07:36:38Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![tk-fuse](https://forum.ficusonline.com/user_avatar/forum.ficusonline.com/tk-fuse/32/255_2.png) [@tk-fuse](https://forum.ficusonline.com/u/tk-fuse)\
**Post date:** [2017 年 5 月 26 日午前 7:36 UTC](https://forum.ficusonline.com/t/orange-pi-lite-lirc/104/1 "2017-05-26T07:36:38Z")

</div>

＜環境＞  
Linux orangepilite 3.4.113-sun8i #10 SMP PREEMPT Thu Feb 23 19:55:00 CET 2017 armv7l armv7l armv7l GNU/Linux

LIRCは標準でインストールされています。Orange Pi PCの場合と設定はほぼ同じですが、 **/etc/lirc/hardware.conf** の設定が少し異なります。以下の指定箇所を確認・変更します。

$ sudo pico /etc/lirc/hardware.conf

```
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="car_remote"
REMOTE_MODULES="sunxi_cir" ここを指定
REMOTE_DRIVER="default" ここを指定
REMOTE_DEVICE="/dev/lirc0" ここを指定
REMOTE_SOCKET=""
REMOTE_LIRCD_CONF="/etc/lirc/lircd.conf" ここを指定
REMOTE_LIRCD_ARGS="--uinput" ここを指定

#Chosen IR Transmitter
TRANSMITTER="None"
TRANSMITTER_MODULES=""
TRANSMITTER_DRIVER=""
TRANSMITTER_DEVICE=""
TRANSMITTER_SOCKET=""
TRANSMITTER_LIRCD_CONF=""
TRANSMITTER_LIRCD_ARGS=""

#Disable kernel support.
#Typically, lirc will disable in-kernel support for ir devices in order to
#handle them internally. Set to false to prevent lirc from disabling this
#in-kernel support. 
#DISABLE_KERNEL_SUPPORT="true"

#Enable lircd
START_LIRCD="true" ここを指定

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD="false"

#Try to load appropriate kernel modules
LOAD_MODULES="true"

# Default configuration files for your hardware if any
LIRCMD_CONF=""

#Forcing noninteractive reconfiguration
#If lirc is to be reconfigured by an external application
#that doesn't have a debconf frontend available, the noninteractive
#frontend can be invoked and set to parse REMOTE and TRANSMITTER
#It will then populate all other variables without any user input
#If you would like to configure lirc via standard methods, be sure
#to leave this set to "false"
FORCE_NONINTERACTIVE_RECONFIGURATION="false"
START_LIRCMD=""

```